Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- More accurate than DIN
- All functional surfaces fine machined
Your current product selection:
Duo-Lock™ Monoblock holder DIN 69893-1 · HSK-A63
Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- More accurate than DIN
- All functional surfaces fine machined
Duo-Lock™ Monoblock holder DIN 69893-1 · HSK-A63
Duo-Lock™ Monoblock holder for direct clamping of the Duo-Lock™milling head Perfectly suitable for milling with short overhang.
- All holders incl. inner coolant
- Hardened 54-2 HRC
Technical data subject to change without prior notice.
Technical drawing
Technical data:
| Interface | DL10 |
|---|---|
| Clamping Ø D1 [mm] | 10 |
| Ø D2 [mm] | 9.6 |
| Length L1 [mm] | 22 |
| L2 [mm] | 5 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| A63.190.DL10 |  Short, 48.00 mm |
|
|
Accessory |
| Interface | DL12 |
|---|---|
| Clamping Ø D1 [mm] | 12 |
| Ø D2 [mm] | 11.5 |
| Length L1 [mm] | 26 |
| L2 [mm] | 6 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| A63.190.DL12 |  Short, 52.00 mm |
|
|
Accessory |
| Interface | DL16 |
|---|---|
| Clamping Ø D1 [mm] | 16 |
| Ø D2 [mm] | 15.5 |
| Length L1 [mm] | 31 |
| L2 [mm] | 8 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| A63.190.DL16 |  Short, 57.00 mm |
|
|
Accessory |
| Interface | DL20 |
|---|---|
| Clamping Ø D1 [mm] | 20 |
| Ø D2 [mm] | 19.3 |
| Length L1 [mm] | 31 |
| L2 [mm] | 10 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| A63.190.DL20 |  Short, 57.00 mm |
|
|
Accessory |
| Interface | DL25 |
|---|---|
| Clamping Ø D1 [mm] | 25 |
| Ø D2 [mm] | 24 |
| Length L1 [mm] | 35 |
| L2 [mm] | 12.5 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| A63.190.DL25 |  Short, 61.00 mm |
|
|
Accessory |
| Interface | DL32 |
|---|---|
| Clamping Ø D1 [mm] | 32 |
| Ø D2 [mm] | 31 |
| Length L1 [mm] | 46 |
| L2 [mm] | 16 |
| Order No. | Gage length A in mm | |||||
|---|---|---|---|---|---|---|
| A63.190.DL32 |  Short, 72.00 mm |
|
|
Accessory |
| Interface | DL10 |
|---|---|
| Clamping Ø D1 [inch] | 3/8 |
| Ø D2 [inch] | 0.3593 |
| Length L1 [inch] | 0.9783 |
| L2 [inch] | 0.1875 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.190.DL10i |  short, 2.00 inch |
|
|
Accessory |
| Interface | DL12 |
|---|---|
| Clamping Ø D1 [inch] | 1/2 |
| Ø D2 [inch] | 0.4803 |
| Length L1 [inch] | 1.2283 |
| L2 [inch] | 0.25 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.190.DL12i |  short, 2.25 inch |
|
|
Accessory |
| Interface | DL16 |
|---|---|
| Clamping Ø D1 [inch] | 5/8 |
| Ø D2 [inch] | 0.6053 |
| Length L1 [inch] | 1.2283 |
| L2 [inch] | 0.3125 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.190.DL16i |  short, 2.25 inch |
|
|
Accessory |
| Interface | DL20 |
|---|---|
| Clamping Ø D1 [inch] | 3/4 |
| Ø D2 [inch] | 0.7303 |
| Length L1 [inch] | 1.2283 |
| L2 [inch] | 0.375 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.190.DL20i |  short, 2.25 inch |
|
|
Accessory |
| Interface | DL25 |
|---|---|
| Clamping Ø D1 [inch] | 1 |
| Ø D2 [inch] | 0.9606 |
| Length L1 [inch] | 1.4783 |
| L2 [inch] | 0.5 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.190.DL25i |  short, 2.50 inch |
|
|
Accessory |
| Interface | DL32 |
|---|---|
| Clamping Ø D1 [inch] | 1 1/4 |
| Ø D2 [inch] | 1.2106 |
| Length L1 [inch] | 1.8583 |
| L2 [inch] | 0.625 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.190.DL32i |  short, 2.88 inch |
|
|
Accessory |
