Certificate of Quality
- Shank tolerance h6
- Inner coolant bore
- With Safe-Lock as standard
Your current product selection:
Duo-Lock™ Extension Conical - Short - Steel
Certificate of Quality
- Shank tolerance h6
- Inner coolant bore
- With Safe-Lock as standard
Duo-Lock™ Extension Conical - Short - Steel
- Shank tolerance: h6
- With inner coolant bore
- With Safe-Lock™ as standard
Also available:
Extensions with coating - for perfect shrinking in and out even at high forces during machining
Attention:
For long-life cycle of the system compliance with the torque is required!
Technical data subject to change without prior notice.
Technical drawing
Technical data
| Order No. | |
|---|---|
75.1/2z0.DL10 | |
75.1/2z0.DL10.1 | |
75.5/8z0.DL10 | |
75.5/8z0.DL10.1 | |
75.3/4z0.DL10 | |
75.3/4z0.DL10.1 | |
75.5/8z0.DL12 | |
75.5/8z0.DL12.1 | |
75.3/4z0.DL12 | |
75.3/4z0.DL12.1 | |
75.3/4z0.DL16 | |
75.3/4z0.DL16.1 | |
75.1z0.DL16 | |
75.1z0.DL16.1 | |
75.1z0.DL20 | |
75.1z0.DL20.1 | |
75.11/4z0.DL25 | |
75.11/4z0.DL25.1 | |
75.11/2z0.DL32 | |
75.11/2z0.DL32.1 | |
75.2z0.DL32 | |
75.2z0.DL32.1 | |
| Interface | Clamping Ø D1 [inch] | Length L1 [inch] | Outer Ø D2 [inch] | Internal bore Ø D3 [inch] | Coating | Torque DL-Interface [Nm] | Downloads |
|---|---|---|---|---|---|---|---|
| DL10 | 1/2 | 2.5 | 0.3593 | 0.0984 | No | 20 | DXF | Step |
| DL10 | 1/2 | 2.5 | 0.3593 | 0.0984 | Yes | 20 | DXF | Step |
| DL10 | 5/8 | 3.5 | 0.3593 | 0.0984 | No | 20 | DXF | Step |
| DL10 | 5/8 | 3.5 | 0.3593 | 0.0984 | Yes | 20 | DXF | Step |
| DL10 | 3/4 | 4.5 | 0.3593 | 0.0984 | No | 20 | DXF | Step |
| DL10 | 3/4 | 4.5 | 0.3593 | 0.0984 | Yes | 20 | DXF | Step |
| DL12 | 5/8 | 3.25 | 0.4803 | 0.0984 | No | 30 | DXF | Step |
| DL12 | 5/8 | 3.25 | 0.4803 | 0.0984 | Yes | 30 | DXF | Step |
| DL12 | 3/4 | 4.25 | 0.4803 | 0.0984 | No | 30 | DXF | Step |
| DL12 | 3/4 | 4.25 | 0.4803 | 0.0984 | Yes | 30 | DXF | Step |
| DL16 | 3/4 | 3.25 | 0.6053 | 0.1181 | No | 60 | DXF | Step |
| DL16 | 3/4 | 3.25 | 0.6053 | 0.1181 | Yes | 60 | DXF | Step |
| DL16 | 1 | 4.25 | 0.6053 | 0.1181 | No | 60 | DXF | Step |
| DL16 | 1 | 4.25 | 0.6053 | 0.1181 | Yes | 60 | DXF | Step |
| DL20 | 1 | 3.75 | 0.7303 | 0.1181 | No | 80 | DXF | Step |
| DL20 | 1 | 3.75 | 0.7303 | 0.1181 | Yes | 80 | DXF | Step |
| DL25 | 1 1/4 | 4.25 | 0.9606 | 0.1969 | No | 100 | DXF | Step |
| DL25 | 1 1/4 | 4.25 | 09606 | 0.1969 | Yes | 100 | DXF | Step |
| DL32 | 1 1/2 | 5.5 | 1.2106 | 0.1969 | No | 130 | DXF | Step |
| DL32 | 1 1/2 | 5.5 | 1.2106 | 0.1969 | Yes | 130 | DXF | Step |
| DL32 | 2 | 7.5 | 1.2106 | 0.1969 | No | 130 | DXF | Step |
| DL32 | 2 | 7.5 | 1.2106 | 0.1969 | Yes | 130 | DXF | Step |
| Order No. | |
|---|---|
75.120.DL10 | |
75.120.DL10.1 | |
75.160.DL10 | |
75.200.DL10.1 | |
75.200.DL10 | |
75.160.DL10.1 | |
75.160.DL12 | |
75.160.DL12.1 | |
75.200.DL12 | |
75.200.DL12.1 | |
75.200.DL16 | |
75.200.DL16.1 | |
75.250.DL16 | |
75.250.DL16.1 | |
75.250.DL20 | |
75.250.DL20.1 | |
75.320.DL25 | |
75.320.DL25.1 | |
75.400.DL32 | |
75.400.DL32.1 | |
75.500.DL32 | |
75.500.DL32.1 | |
| Interface | Clamping Ø D1 [mm] | Length L1 [mm] | Clamping Ø D2 [mm] | Internal bore Ø D3 [mm] | Coating | Torque DL-Interface [Nm] | Downloads |
|---|---|---|---|---|---|---|---|
| DL10 | 12 | 65 | 9.6 | 2.5 | No | 20 | DXF | Step |
| DL10 | 12 | 65 | 9.6 | 2.5 | Yes | 20 | DXF | Step |
| DL10 | 16 | 90 | 9.6 | 2.5 | No | 20 | DXF | Step |
| DL10 | 20 | 115 | 9.6 | 2.5 | Yes | 20 | DXF | Step |
| DL10 | 20 | 115 | 9.6 | 2.5 | No | 20 | DXF | Step |
| DL10 | 16 | 90 | 9.6 | 2.5 | Yes | 20 | DXF | Step |
| DL12 | 16 | 80 | 11.5 | 2.5 | No | 30 | DXF | Step |
| DL12 | 16 | 80 | 11.5 | 2.5 | Yes | 30 | DXF | Step |
| DL12 | 20 | 105 | 11.5 | 2.5 | No | 30 | DXF | Step |
| DL12 | 20 | 105 | 11.5 | 2.5 | Yes | 30 | DXF | Step |
| DL16 | 20 | 80 | 15.5 | 3 | No | 60 | DXF | Step |
| DL16 | 20 | 80 | 15.5 | 3 | Yes | 60 | DXF | Step |
| DL16 | 25 | 115 | 15.5 | 3 | No | 60 | DXF | Step |
| DL16 | 25 | 115 | 15.5 | 3 | Yes | 60 | DXF | Step |
| DL20 | 25 | 95 | 19.3 | 3 | No | 80 | DXF | Step |
| DL20 | 25 | 95 | 19.3 | 3 | Yes | 80 | DXF | Step |
| DL25 | 32 | 105 | 24 | 5 | No | 100 | DXF | Step |
| DL25 | 32 | 105 | 24 | 5 | Yes | 100 | DXF | Step |
| DL32 | 40 | 140 | 31 | 5 | No | 130 | DXF | Step |
| DL32 | 40 | 140 | 31 | 5 | Yes | 130 | DXF | Step |
| DL32 | 50 | 200 | 31 | 5 | No | 130 | DXF | Step |
| DL32 | 50 | 200 | 31 | 5 | Yes | 130 | DXF | Step |
Additional information
-
Duo-Lock™ Extension Conical - Short - Steel
Metric
