Certificate of Quality
- With inner coolant bore
Your current product selection:
Duo-Lock™ Die and Mold Chuck DIN 69893 · HSK-100
Certificate of Quality
- With inner coolant bore
Duo-Lock™ Die and Mold Chuck DIN 69893 · HSK-100
Duo-Lock™ Die and Mold Chuck for direct Duo-Lock™ clamping.
- With inner coolant bore
- Stable 3° slant for perfect milling on inclined forms
- Including carbide core for vibration-damped milling with Long over-hang lengths
- Repair possible at extra cost (end mill break in interface)
Attention: For long-life cycle of the system compliance with the torque is required!
Technical data subject to change without prior notice.
Technical drawing
Technical data
| Order No. | |
|---|---|
A10.180.DL10.100 | |
A10.180.DL10.150 | |
A10.180.DL12.100 | |
A10.180.DL12.150 | |
A10.180.DL12.200 | |
A10.180.DL12.250 | |
A10.180.DL16.100 | |
A10.180.DL16.150 | |
A10.180.DL16.200 | |
A10.180.DL16.250 | |
A10.180.DL20.250 | |
A10.180.DL20.100 | |
A10.180.DL20.150 | |
A10.180.DL20.200 | |
| Interface | Outer Ø D2 [inch] | L [inch] | Length A [inch] | Torque of Duo-Lock interface [Nm] | Downloads |
|---|---|---|---|---|---|
| DL10 | 0.3780 | 3.9370 | 5.0787 | 20 | DXF | Step |
| DL10 | 0.3780 | 5.9055 | 7.0472 | 20 | DXF | Step |
| DL12 | 0.4528 | 3.9370 | 5.0787 | 30 | DXF | Step |
| DL12 | 0.4528 | 5.9055 | 7.0472 | 30 | DXF | Step |
| DL12 | 0.4528 | 7.8740 | 9.0157 | 30 | DXF | Step |
| DL12 | 0.4528 | 9.8425 | 10.9843 | 30 | DXF | Step |
| DL16 | 0.6102 | 3.9370 | 5.0787 | 60 | DXF | Step |
| DL16 | 0.6102 | 5.9055 | 7.0472 | 60 | DXF | Step |
| DL16 | 0.6102 | 7.8740 | 9.0157 | 60 | DXF | Step |
| DL16 | 0.6102 | 9.8425 | 10.9843 | 60 | DXF | Step |
| DL20 | 0.7598 | 9.8425 | 10.9843 | 80 | DXF | Step |
| DL20 | 0.7598 | 3.9370 | 5.0787 | 80 | DXF | Step |
| DL20 | 0.7598 | 5.9055 | 7.0472 | 80 | DXF | Step |
| DL20 | 0.7598 | 7.8740 | 9.0157 | 80 | DXF | Step |
| Order No. | |
|---|---|
A10.180.DL10.100 | |
A10.180.DL10.150 | |
A10.180.DL12.100 | |
A10.180.DL12.150 | |
A10.180.DL12.200 | |
A10.180.DL12.250 | |
A10.180.DL16.100 | |
A10.180.DL16.150 | |
A10.180.DL16.200 | |
A10.180.DL16.250 | |
A10.180.DL20.100 | |
A10.180.DL20.150 | |
A10.180.DL20.200 | |
A10.180.DL20.250 | |
| Interface | Outer Ø D2 [mm] | L [mm] | Length A [mm] | Torque of Duo-Lock interface [Nm] | Downloads |
|---|---|---|---|---|---|
| DL10 | 9.6 | 100 | 129 | 20 | DXF | Step |
| DL10 | 9.6 | 150 | 179 | 20 | DXF | Step |
| DL12 | 11.5 | 100 | 129 | 30 | DXF | Step |
| DL12 | 11.5 | 150 | 179 | 30 | DXF | Step |
| DL12 | 11.5 | 200 | 229 | 30 | DXF | Step |
| DL12 | 11.5 | 250 | 279 | 30 | DXF | Step |
| DL16 | 15.5 | 100 | 129 | 60 | DXF | Step |
| DL16 | 15.5 | 150 | 179 | 60 | DXF | Step |
| DL16 | 15.5 | 200 | 229 | 60 | DXF | Step |
| DL16 | 15.5 | 250 | 279 | 60 | DXF | Step |
| DL20 | 19.3 | 100 | 129 | 80 | DXF | Step |
| DL20 | 19.3 | 150 | 179 | 80 | DXF | Step |
| DL20 | 19.3 | 200 | 229 | 80 | DXF | Step |
| DL20 | 19.3 | 250 | 279 | 80 | DXF | Step |
Cutting data
-
Duo-Lock™ Die and Mold Chuck DIN 69893 · HSK-100
Metric
