
Certificate of Quality
- Fine balanced
- Best length repeatability
Your current product selection:

Duo-Lock™ HAIMER MILL - F2304UK Cord Profile
Certificate of Quality
- Fine balanced
- Best length repeatability
Duo-Lock™ HAIMER MILL - F2304UK Cord Profile
Solid carbide milling head with Duo- Lock™ interface for maximum stability, load capacity and runout accuracy.
- Neck for higher cutting depth
- Center cutting
- Unequal cutting edge
- Fine balanced
- Best length repeatability
- For almost all materials
- For roughing
Technical data subject to change without prior notice.
Characteristics
-
Helix angle 32/34°Order no. -
-
Corner chamfer 45°Order no. -
-
Teeth 4Order no. -
Application
-
Feed direction (Side milling, Ramping)Order no. -
-
Ramping 3-5°Order no. -
-
SlottingOrder no. -
-
Side millingOrder no. -
Coolant
-
EmulsionOrder no. -
-
Cold airOrder no. -
-
Dry machiningOrder no. -
-
Minimal lubricationOrder no. -
Application Range - Material
-
Main Material:
-
SteelOrder no. -All types of steel and cast steel, with the exception of steel with an austenitic structure
-
Also suitable for:
-
Cast ironOrder no. -Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
-
High temperature alloys and titanium alloysOrder no. -Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
-
NF metalsOrder no. -Aluminium and other non-ferrous metals, non ferrous materials
-
Stainless steelOrder no. -Stainless austenitic steel and austenitic-ferritic steel and cast steel
-
Hard materialsOrder no. -Hardened steel, hardened cast iron materials, chilled cast iron
Technical drawing

Technical data
Order No. | |
---|---|
DL10F2304UK3/8ZCDA | |
DL12F2304UK1/2ZCDA | |
DL16F2304UK5/8ZCDA | |
DL20F2304UK3/4ZCDA |
Duo-Lock™ size | D1 (f9) [inch] | Cutting edge | Size [inch] | L1 max. [inch] | L [inch] | D2 [inch] | AF [inch] | Torque [N/m] | HAIMER quality | Downloads |
---|---|---|---|---|---|---|---|---|---|---|
DL10 | 3/8 | C | 0.012 | 0.295 | 0.492 | 0.359 | 0.315 | 20 | DA | DXF | Step |
DL12 | 1/2 | C | 0.012 | 0.354 | 0.591 | 0.480 | 0.374 | 30 | DA | DXF | Step |
DL16 | 5/8 | C | 0.020 | 0.472 | 0.787 | 0.605 | 0.512 | 60 | DA | DXF | Step |
DL20 | 3/4 | C | 0.024 | 0.591 | 0.984 | 0.730 | 0.630 | 80 | DA | DXF | Step |
Order No. | |
---|---|
DL10F2304UK1000CDA | |
DL12F2304UK1200CDA | |
DL16F2304UK1600CDA | |
DL20F2304UK2000CDA |
Duo-Lock™ size | D1 (f9) [mm] | Cutting edge | Size [mm] | L1 max. [mm] | L [mm] | D2 [mm] | SW [mm] | Torque [N/m] | HAIMER quality | Downloads |
---|---|---|---|---|---|---|---|---|---|---|
DL10 | 10.00 | C | 0.30 | 7.5 | 12.5 | 9.6 | SW8 | 20 | DA | DXF | Step |
DL12 | 12.00 | C | 0.30 | 9 | 15 | 11.5 | SW9,5 | 30 | DA | DXF | Step |
DL16 | 16.00 | C | 0.50 | 12 | 20 | 15.5 | SW13 | 60 | DA | DXF | Step |
DL20 | 20.00 | C | 0.60 | 15 | 25 | 19.3 | SW16 | 80 | DA | DXF | Step |