
Certificate of Quality
- Fine balanced
- Best length repeatability
- Multifunctional tool
- Center spot
Your current product selection:

Duo-Lock™ HAIMER MILL - E1002KK Multifunction End Mill
Certificate of Quality
- Fine balanced
- Best length repeatability
- Multifunctional tool
- Center spot
Duo-Lock™ HAIMER MILL - E1002KK Multifunction End Mill
Solid carbide milling head with Duo- Lock™ interface for maximum stability, load capacity and runout accuracy.
- Cone angle 60/90/120/142°
- Center spot
- Multifunctional tool
- Circumference cutter
- Best length repeatability
Technical data subject to change without prior notice.
Characteristics
-
Helix angle 20°Order no. -
-
Cone angleOrder no. -
-
Teeth 6/8Order no. -
Application
-
Feed direction (Side milling, Ramping, Drilling)Order no. -
-
V-slottingOrder no. -
-
ContouringOrder no. -
-
ChamferingOrder no. -
-
Side millingOrder no. -
Coolant
-
EmulsionOrder no. -
-
Cold airOrder no. -
-
Dry machiningOrder no. -
-
Minimal lubricationOrder no. -
Application Range - Material
-
Main Material:
-
SteelOrder no. -All types of steel and cast steel, with the exception of steel with an austenitic structure
-
Also suitable for:
-
Cast ironOrder no. -Grey cast iron, cast iron with spheroidal graphite, malleable cast iron, cast iron with vermicular graphite
-
High temperature alloys and titanium alloysOrder no. -Heat resisting special alloys based on iron, nickel and cobalt, titanium and titanium alloys
-
NF metalsOrder no. -Aluminium and other non-ferrous metals, non ferrous materials
-
Stainless steelOrder no. -Stainless austenitic steel and austenitic-ferritic steel and cast steel
-
Hard materialsOrder no. -Hardened steel, hardened cast iron materials, chilled cast iron
Technical drawing

Technical data
Order No. | |
---|---|
DL10E1002KK1000W60DA | |
DL10E1002KK1000W90DA | |
DL10E1002KK1000W120DA | |
DL10E1002KK1000W142DA | |
DL12E1002KK1200W60DA | |
DL12E1002KK1200W90DA | |
DL12E1002KK1200W120DA | |
DL12E1002KK1200W142DA | |
DL16E1002KK1600W60DA | |
DL16E1002KK1600W90DA | |
DL16E1002KK1600W120DA | |
DL16E1002KK1600W142DA | |
DL20E1002KK2000W60DA | |
DL20E1002KK2000W90DA | |
DL20E1002KK2000W120DA | |
DL20E1002KK2000W142DA |
Duo-Lock™ size | No. teeth | D1 (h9) [mm] | Chamfer | Angle W1 | L1 max. [mm] | L [mm] | D2 [mm] | SW [mm] | Torque [N/m] | HAIMER quality | Downloads |
---|---|---|---|---|---|---|---|---|---|---|---|
DL10 | 2 | 10.00 | W | 60° | 10 | 12,5 | 9,6 | SW8 | 20 | DA | DXF | Step |
DL10 | 2 | 10.00 | W | 90° | 10 | 12,5 | 9,6 | SW8 | 20 | DA | DXF | Step |
DL10 | 2 | 10.00 | W | 120° | 10 | 12,5 | 9,6 | SW8 | 20 | DA | DXF | Step |
DL10 | 2 | 10.00 | W | 142° | 10 | 12,5 | 9,6 | SW8 | 20 | DA | DXF | Step |
DL12 | 2 | 12.00 | W | 60° | 12 | 15 | 11,5 | SW9,5 | 30 | DA | DXF | Step |
DL12 | 2 | 12.00 | W | 90° | 12 | 15 | 11,5 | SW9,5 | 30 | DA | DXF | Step |
DL12 | 2 | 12.00 | W | 120° | 12 | 15 | 11,5 | SW9,5 | 30 | DA | DXF | Step |
DL12 | 2 | 12.00 | W | 142° | 12 | 15 | 11,5 | SW9,5 | 30 | DA | DXF | Step |
DL16 | 2 | 16.00 | W | 60° | 16 | 20 | 15,5 | SW13 | 60 | DA | DXF | Step |
DL16 | 2 | 16.00 | W | 90° | 16 | 20 | 15,5 | SW13 | 60 | DA | DXF | Step |
DL16 | 2 | 16.00 | W | 120° | 16 | 20 | 15,5 | SW13 | 60 | DA | DXF | Step |
DL16 | 2 | 16.00 | W | 142° | 16 | 20 | 15,5 | SW13 | 60 | DA | DXF | Step |
DL20 | 2 | 20.00 | W | 60° | 20 | 25 | 19,3 | SW16 | 80 | DA | DXF | Step |
DL20 | 2 | 20.00 | W | 90° | 20 | 25 | 19,3 | SW16 | 80 | DA | DXF | Step |
DL20 | 2 | 20.00 | W | 120° | 20 | 25 | 19,3 | SW16 | 80 | DA | DXF | Step |
DL20 | 2 | 20.00 | W | 142° | 20 | 25 | 19,3 | SW16 | 80 | DA | DXF | Step |