Find your representative

Find your representative

  find
Find topic
Change language

HSK-F80 Makino Face Mill Arbor

Certificate of Quality

  • Chuck fine balanced G2.5 at 33.000 rpm
  • Balanceable via screws M6
  • Integrated thread for coolant supply tube
Your current product selection:
HSK-F80 Makino Face Mill Arbor

Face Mill Arbor
HSK-F80 Makino

Certificate of Quality

  • Chuck fine balanced G2.5 at 33.000 rpm
  • Balanceable via screws M6
  • Integrated thread for coolant supply tube

Face Mill Arbor
HSK-F80 Makino

For holding face-mill cutters and milling cutters with radial driving slot DIN 1880

The HAIMER HSK-F80 Makino Face-mill arbors provide a solid base for face-mill cutters for high-speed manufacturing. The optimized design combines a highly accurate universal clamping system for cutting tools.

  • All pre-balanced to G2.5 @ 33,000 RPM
  • With threaded holes in order to balance with balancing screws
  • Short gage length per machine builders recommendation
  • Higher machining accuracy due to proper construction
  • Coolant bores on front side available for an extra charge
  • Included in delivery: Tightening bolt, without coolant tube

Technical data subjects to change without prior notice.

Technical drawing

F80 Makino Face Mill Arbor Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [inch] 3/4
Ø D2 [inch]1.710
L [inch]0.669
Order No. Gage length A in inch    
F80M.050.3/4z HSK-F80 Face Mill Arbor short Pictogram
short, 1.97 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
F80M.051.3/4z HSK-F80 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 1
Ø D2 [inch]2.165
L [inch]0.669
Order No. Gage length A in inch    
F80M.050.1z HSK-F80 Face Mill Arbor short Pictogram
short, 1.97 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
F80M.051.1z HSK-F80 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Product wishlist