Find your representative

Find your representative

  find
Find topic
Change language

HSK-F80 Makino Collet Chuck Typ ER

Certificate of Quality

  • Chuck fine balanced G2.5 at 33.000 rpm
  • Balanceable via screws M6
  • Integrated thread for coolant supply tube
Your current product selection:
HSK-F80 Makino Collet Chuck Typ ER

Collet Chuck Type ER
HSK-F80 Makino

Certificate of Quality

  • Chuck fine balanced G2.5 at 33.000 rpm
  • Balanceable via screws M6
  • Integrated thread for coolant supply tube

Collet Chuck Type ER
HSK-F80 Makino

For clamping tools with cylindrical shank in ER collets according to ISO 15488.

The HAIMER HSK-F80 Makino ER collet chucks provide a universal clamping solution for high-speed manufacturing. The optimized design combines a highly accurate universal clamping system for cutting tools.

  • All pre-balanced to G2.5 @ 33,000 RPM
  • All standard as a balanceable for fine tune balancing capability
  • Short gage length per machine builders recommendation
  • Balanced nuts with special slide coating for low friction and higher clamping forces
  • Great for drilling
  • Good clamping force
  • Higher machining accuracy
  • With threaded holes in order to balance with balancing screws (where available)
  • Locknut type HS (high-speed, fine-balanced, with slide coating for higher clamping forces) available for an extra charge
  • Included in delivery: Locknut (balanced, with slide coating for higher clamping forces)

Technical data subjects to change without prior notice.

Features Collet Chuck Typ ER

The most important features:

  • 1. Fine balanced G2.5 at 33,000 rpm
  • 2. All functional surfaces grinded
  • 3. Fine balanced ER nut
  • 4. High runout accuracy
Features Collet Chuck Typ ER

The most important features:

  • 1. Fine balanced G2.5 at 33,000 rpm
  • 2. All functional surfaces grinded
  • 3. Fine balanced ER nut
  • 4. High runout accuracy

Technical drawing

F80 Makino Collet Chuck Typ ER Technical Drawing

Please select your clamping diameter:

Version ER 11
Clamping range [inch]0.02 - 0.276
Ø D [inch]1.062
L [inch]1.043
Order No. Gage length A in inch    
F80M.025.11 HSK-F80 Collet Chuck Standard ultra short Pictogram
ultra short, 3.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  4. Flat wrench for ER locknuts

    Flat wrench for ER locknuts

    Wrench for locknuts ER 11, ER 16, ER 20

  5. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  6. Locknut ER

    Locknut ER

    Locknut pre-balanced

  7. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Version ER 16
Clamping range [inch]0.02 - 0.394
Ø D [inch]1.102
L [inch]1.279
Order No. Gage length A in inch    
F80M.025.16 HSK-F80 Collet Chuck Standard ultra short Pictogram
ultra short, 3.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  4. Flat wrench for ER locknuts

    Flat wrench for ER locknuts

    Wrench for locknuts ER 11, ER 16, ER 20

  5. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  6. Locknut ER

    Locknut ER

    Locknut pre-balanced

  7. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 20
Clamping range [inch]0.059 - 0.512
Ø D [inch]1.574
L [inch]1.515
Order No. Gage length A in inch    
F80M.025.20 HSK-F80 Collet Chuck Standard ultra short Pictogram
ultra short, 3.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  4. Flat wrench for ER locknuts

    Flat wrench for ER locknuts

    Wrench for locknuts ER 11, ER 16, ER 20

  5. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  6. Locknut ER

    Locknut ER

    Locknut pre-balanced

  7. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 25
Clamping range [inch]0.039 - 0.63
Ø D [inch]1.653
L [inch]1.889
Order No. Gage length A in inch    
F80M.025.25 HSK-F80 Collet Chuck Standard ultra short Pictogram
ultra short, 3.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  6. Locknut ER

    Locknut ER

    Locknut pre-balanced

  7. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 32
Clamping range [inch]0.02 - 0.787
Ø D [inch]1.968
L [inch]1.850
Order No. Gage length A in inch    
F80M.025.32 HSK-F80 Collet Chuck Standard ultra short Pictogram
ultra short, 3.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  6. Locknut ER

    Locknut ER

    Locknut pre-balanced

  7. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 40
Clamping range [inch]0.098 - 1.024
Ø D [inch]2.483
L [inch]2.086
Order No. Gage length A in inch    
F80M.025.40 HSK-F80 Collet Chuck Standard ultra short Pictogram
ultra short, 3.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  6. Locknut ER

    Locknut ER

    Locknut pre-balanced

  7. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Product wishlist