
Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- All functional surfaces fine machined
- More accurate than DIN
Your current product selection:

Shrink Fit Chuck Standard Version
DIN 69893-5 · HSK-E32
Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- All functional surfaces fine machined
- More accurate than DIN
Shrink Fit Chuck Standard Version
DIN 69893-5 · HSK-E32
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-5
- Heat resistant hot-working steel
- Hardened 54 – 2 HRC
- For HSS and solid carbide tools
- Shank tolerance h6
- With threaded holes in order to balance with balancing screws
- With threaded holes in order to balance with balancing screws
- Cooling with Cool Jet for an extra charge
- Cooling with Cool Flash for an extra charge
- Included in delivery: Backup screw, without coolant tube
Technical data subjects to change without prior notice.
Standard version, similar to DIN 69882-8.
Technical drawing

Please select your clamping diameter:
Clamping Ø D1 [inch] | 1/8 |
---|---|
Ø D2 [inch] | 0.39 |
L [inch] | 0.35 |
Order No. | Gage length A in inch | |||||
---|---|---|---|---|---|---|
E32.140.1/8z | ![]() short, 2.36 inch Without back-up screws, without threads for balancing screws, with slits along the clamping bore for coolant around the tool |
|
|
Accessory |
Clamping Ø D1 [inch] | 3/16 |
---|---|
Ø D2 [inch] | 0.39 |
L [inch] | 0.59 |
Order No. | Gage length A in inch | |||||
---|---|---|---|---|---|---|
E32.140.3/16z | ![]() short, 2.36 inch Without back-up screws, without threads for balancing screws, with slits along the clamping bore for coolant around the tool |
|
|
Accessory |
Clamping Ø D1 [inch] | 1/4 |
---|---|
Ø D2 [inch] | 0.83 |
L [inch] | 1.42 |
Order No. | Gage length A in inch | |||||
---|---|---|---|---|---|---|
E32.140.1/4z | ![]() short, 2.76 inch |
|
|
Accessory |
Clamping Ø D1 [inch] | 3/8 |
---|---|
Ø D2 [inch] | 0.94 |
L [inch] | 1.65 |
Order No. | Gage length A in inch | |||||
---|---|---|---|---|---|---|
E32.140.3/8z | ![]() short, 3.15 inch |
|
|
Accessory |
Clamping Ø D1 [mm] | 3 |
---|---|
Ø D2 [mm] | 10 |
Ø D3 [mm] | - |
L [mm] | 9 |
Order No. | Gage length A in mm | |||||
---|---|---|---|---|---|---|
E32.140.03 | ![]() short, 60.00 mm Without back-up screw, without threads for balancing screws, with slits along the clamping bore for cooling from outside |
|
|
Accessory |
Clamping Ø D1 [mm] | 4 |
---|---|
Ø D2 [mm] | 10 |
Ø D3 [mm] | - |
L [mm] | 12 |
Order No. | Gage length A in mm | |||||
---|---|---|---|---|---|---|
E32.140.04 | ![]() short, 60.00 mm Without back-up screw, without threads for balancing screws, with slits along the clamping bore for cooling from outside |
|
|
Accessory |
Clamping Ø D1 [mm] | 5 |
---|---|
Ø D2 [mm] | 10 |
Ø D3 [mm] | - |
L [mm] | 15 |
Order No. | Gage length A in mm | |||||
---|---|---|---|---|---|---|
E32.140.05 | ![]() short, 60.00 mm Without back-up screw, without threads for balancing screws, with slits along the clamping bore for cooling from outside |
|
|
Accessory |
Clamping Ø D1 [mm] | 6 |
---|---|
Ø D2 [mm] | 21 |
Ø D3 [mm] | 27 |
L [mm] | 36 |
Order No. | Gage length A in mm | |||||
---|---|---|---|---|---|---|
E32.140.06 | ![]() short, 70.00 mm Without threads for balancing screws |
|
|
Accessory |
Clamping Ø D1 [mm] | 8 |
---|---|
Ø D2 [mm] | 21 |
Ø D3 [mm] | 27 |
L [mm] | 36 |
Order No. | Gage length A in mm | |||||
---|---|---|---|---|---|---|
E32.140.08 | ![]() short, 70.00 mm Without threads for balancing screws |
|
|
Accessory |
Clamping Ø D1 [mm] | 10 |
---|---|
Ø D2 [mm] | 24 |
Ø D3 [mm] | 32 |
L [mm] | 42 |
Order No. | Gage length A in mm | |||||
---|---|---|---|---|---|---|
E32.140.10 | ![]() short, 80.00 mm Without threads for balancing screws |
|
|
Accessory |