Find your representative

Find your representative

  find
Find topic
Change language
HSK-A80 Shrink Fit Chuck Standard

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN
Your current product selection:
HSK-A80 Shrink Fit Chuck Standard

Shrink Fit Chuck Standard Version
DIN 69893-1 · HSK-A80

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN

Shrink Fit Chuck Standard Version
DIN 69893-1 · HSK-A80

Shrink fit chuck suitable to all kind of shrink fit units.

DIN 69893-1

  • Heat resistant hot-working steel
  • Hardened 54 – 2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
  • Cooling with Cool Jet for an extra charge
  • Cooling with Cool Flash for an extra charge
  • Included in delivery: Backup screw, without coolant tube

Technical data subjects to change without prior notice.

Standard version, similar to DIN 69882-8.

Features Shrink Fit Chuck Standard

The most important features:

  • 1. High runout accuracy (< 3 μm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Features Shrink Fit Chuck Standard

The most important features:

  • 1. High runout accuracy (< 3 μm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet for Shrink Fit Chucks (optional)

Cool Jet (optional)

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 1/4" (6 mm)
Cool Jet for Shrink Fit Chucks (optional)

Cool Jet (optional)

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
  • Cool Jet starting from shank diameter 1/4" (6 mm)
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)

Technical drawing

HSK-A80 Shrink Fit Chuck Standard Technical Drawing
Product wishlist