Find your representative

Find your representative

  find
Find topic
Change language

HSK-A80 Shrink Fit Chuck Power Shrink Chuck

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN
  • Cool Jet, can be sealed
Your current product selection:
HSK-A80 Shrink Fit Chuck Power Shrink Chuck

Power Shrink Chuck
DIN 69893-1 · HSK-A80

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN
  • Cool Jet, can be sealed

Power Shrink Chuck
DIN 69893-1 · HSK-A80

Shrink fit chuck suitable to all inductive shrink fit units.

The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.

  • Without back-up screw for max. tool clamping depth
  • Optimized outer geometry and therefore perfect for blisk and blade machining
  • Increased machining capacity due to higher spindle speed, higher feed rates and larger cutting depth
  • Shorter processing times
  • Higher machining accuracy
  • With threaded holes in order to balance with balancing screws
  • Cool Jet bores that can be sealed included

The long versions with slim tips are especially versatile to use.

  • High rigidity
  • Slim at the tip
  • Dampen vibrations
  • High clamping force
  • Equally suited to high-speed manufacturing and heavy milling
  • Universal usage, saves space in tool magazine

Optional:

  • Cooling with Cool Flash on extra Charge
  • Safe-Lock™ Pull out protection from Ø 8 mm on extra charge

Technical data subjects to change without prior notice.

Features Power Shrink Chuck

The most important features:

  • 1. High runout accuracy (< 3 μm)
  • 2. Low tendency towards vibrations by optimised outer geometry
  • 3. Slim design at the top
  • 4. Very rigid shank
  • 5. Standard with Cool Jet (can be re-sealed)
  • 6. Dirt groove in the clamping bore for safe clamping force
  • 7. Safe-Lock™ (optional)
Features Power Shrink Chuck

The most important features:

  • 1. High runout accuracy (< 3 μm)
  • 2. Low tendency towards vibrations by optimised outer geometry
  • 3. Slim design at the top
  • 4. Very rigid shank
  • 5. Standard with Cool Jet (can be re-sealed)
  • 6. Dirt groove in the clamping bore for safe clamping force
  • 7. Safe-Lock™ (optional)
Cool Jet for Shrink Fit Chucks

Cool Jet

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Cool Jet for Shrink Fit Chucks

Cool Jet

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Machining example Power Shrink Chuck vs. Standard Shrink Cuck

Machining example Power Shrink Cuck

  • Milling - Ø: 16 mm; n = 13.000 rpm, Feed rate: vf = 5,2 m/min
  • Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
  • Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Machining example Power Shrink Chuck vs. Standard Shrink Cuck

Machining example Power Shrink Cuck

  • Milling - Ø: 16 mm; n = 13.000 rpm, Feed rate: vf = 5,2 m/min
  • Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
  • Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)

Technical drawing

HSK-A80 Shrink Fit Chuck Power Shrink Chuck Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [mm] 8
Ø D2 [mm]21
Ø D3 [mm] short66
Ø D3 [mm]65
Order No. Gage length A in mm    
A80.149.08.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.08.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.08.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 10
Ø D2 [mm]24
Ø D3 [mm] short66
Ø D3 [mm]65
L [mm] short68
L [mm] ZG13070
L [mm] oversize70
Order No. Gage length A in mm    
A80.149.10.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.10.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.10.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 12
Ø D2 [mm]24
Ø D3 [mm] short66
Ø D3 [mm]65
L [mm] short71
L [mm] ZG13075
L [mm] oversize75
Order No. Gage length A in mm    
A80.149.12.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  7. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
A80.149.12.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  7. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
A80.149.12.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  7. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  9. Reduction Sleeves for Shrink Fit Chucks

    Reduction Sleeves for Shrink Fit Chucks

    For clamping small shanks in chucks with diameter 12 mm ID`s
Clamping Ø D1 [mm] 16
Ø D2 [mm]27
Ø D3 [mm] short66
Ø D3 [mm]65
L [mm] short70
L [mm] ZG13075
L [mm] oversize75
Order No. Gage length A in mm    
A80.149.16.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.16.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.16.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [mm] 20
Ø D2 [mm]33
Ø D3 [mm] short66
Ø D3 [mm]65
L [mm] short69
L [mm] ZG13096
L [mm] oversize101
Order No. Gage length A in mm    
A80.149.20.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.20.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 130.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.20.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 1/2
Ø D2 [inch]0.944
Ø D3 [inch] short2.598
Ø D3 [inch]2.559
L [inch] short2.795
L [inch] ZG1302.952
L [inch] oversize2.952
Order No. Gage length A in inch    
A80.149.1/2z.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 3937.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.1/2z.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 5118.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.1/2z.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 3/4
Ø D2 [inch]1.299
Ø D3 [inch] short2.598
Ø D3 [inch]2.559
L [inch] short2.716
L [inch] ZG1303.779
L [inch] oversize3.976
Order No. Gage length A in inch    
A80.149.3/4z.3.2140 HSK-A80 Shrink Fit Chuck Power Shrink Chuck short Pictogramm
short, 3937.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.3/4z.3.2144 HSK-A80 Shrink Fit Chuck Power Shrink Chuck ZG130 Pictogramm
ZG130, 5118.00 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
A80.149.3/4z.3.2142 HSK-A80 Shrink Fit Chuck Power Shrink Chuck oversize Pictogramm
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  6. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Product wishlist