Find your representative

Find your representative

  find
Find topic
Change language

HSK-A63/80 Shrink Fit Chuck Power Shrink Chuck with Safe-Lock™

Certificate of Quality

  • Chuck body fine balanced G2.5 33.000 1/min or U<1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN
Your current product selection:
HSK-A63/80 Shrink Fit Chuck Power Shrink Chuck with Safe-Lock™

Power Shrink Chuck with Safe-Lock™
DIN 69893-1 · HSK-A63/80 (Taper HSK-A63 / Flange 80 mm)

Certificate of Quality

  • Chuck body fine balanced G2.5 33.000 1/min or U<1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN

Power Shrink Chuck with Safe-Lock™
DIN 69893-1 · HSK-A63/80 (Taper HSK-A63 / Flange 80 mm)

Shrink fit chuck suitable to all inductive shrink fit units.

The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.

  • Increased machining capacity due to higher spindle speed, higher feed and larger cutting depth
  • Shorter processing times
  • Higher machining accuracy

Delivery includes:

  • With Safe-Lock™ pull-out protection
  • With Cool-Jet bores (sealed)
  • With threaded holes in order to balance with balancing screws
  • Incl. hole for data chip
  • With thread for coolant tube

Technical data subjects to change without prior notice.

Technical drawing

HSK-A63/80 Shrink Fit Chuck Power Shrink Chuck with Safe-Lock™ - Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [mm] 8
Ø D2 [mm] uk-uk-
Ø D2 [mm] ultra short / short22
Ø D2 [mm] ZG130-
Ø D3 [mm] ZG130-
L [mm] uk-uk-
L [mm] ultra short / short38
L [mm] ZG130-
Order No. Gage length A in mm    
A63/80.145.08.37
ultrakurz, 70.00 mm

ohne Längeneinstellschraube
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [mm] 10
Ø D2 [mm] uk-uk-
Ø D2 [mm] ultra short / short26.5
Ø D2 [mm] ZG130-
Ø D3 [mm] ZG130-
L [mm] uk-uk-
L [mm] ultra short / short43
L [mm] ZG130-
Order No. Gage length A in mm    
A63/80.145.10.37
ultra short, 70.00 mm

ohne Längeneinstellschraube
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [mm] 12
Ø D2 [mm] uk-uk-
Ø D2 [mm] ultra short / short26,5
Ø D2 [mm] ZG13024
Ø D3 [mm] ZG13065
L [mm] uk-uk-
L [mm] ultra short / short46
L [mm] ZG13047
Order No. Gage length A in mm    
A63/80.145.12.37
ultra short, 70.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.144.12.37
ZG130, 130.00 mm

with back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [mm] 16
Ø D2 [mm] uk-uk-
Ø D2 [mm] ultra short / short29,5
Ø D2 [mm] ZG13027
Ø D3 [mm] ZG13065
L [mm] uk-uk-
L [mm] ultra short / short49
L [mm] ZG13050
Order No. Gage length A in mm    
A63/80.145.16.37
ultra short, 75.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.144.16.37
ZG130, 130.00 mm

with back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [mm] 20
Ø D2 [mm] uk-uk35,5
Ø D2 [mm] ultra short / short35,5
Ø D2 [mm] ZG130-
Ø D3 [mm] ZG130-
L [mm] uk-uk43,5
L [mm] ultra short / short49
L [mm] ZG130-
Order No. Gage length A in mm    
A63/80.145.20.57
uk-uk, 70.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.145.20.37
ultra short, 75.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [mm] 25
Ø D2 [mm] uk-uk46
Ø D2 [mm] ultra short / short45
Ø D2 [mm] ZG130-
Ø D3 [mm] ZG130-
L [mm] uk-uk47
L [mm] ultra short / short57
L [mm] ZG130-
Order No. Gage length A in mm    
A63/80.145.25.57
uk-uk, 70.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.145.25.37
ultrakurz, 80.00 mm

ohne Längeneinstellschraube
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.140.25.37
short, 90.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [mm] 32
Ø D2 [mm] uk-uk-
Ø D2 [mm] ultra short / short45
Ø D2 [mm] ZG130-
Ø D3 [mm] ZG130-
L [mm] uk-uk-
L [mm] ultra short / short59
L [mm] ZG130-
Order No. Gage length A in mm    
A63/80.140.32.37
short, 90.00 mm

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [inch] 1/2
Ø D2 [inch] uk-uk-
Ø D2 [inch] ultra short1.04
Ø D2 [inch] ZG1300.94
Ø D3 [inch] ZG1302.56
L [inch] uk-uk-
L [inch] ultra short1.81
L [inch] ZG1301.85
Order No. Gage length A in inch    
A63/80.145.1/2z.37.i
ultra short, 3.00 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.144.1/2z.37.i
ZG130, 5.12 inch

with back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [inch] 5/8
Ø D2 [inch] uk-uk-
Ø D2 [inch] ultra short1.16
Ø D2 [inch] ZG1301.06
Ø D3 [inch] ZG1302.56
L [inch] uk-uk-
L [inch] ultra short1.93
L [inch] ZG1301.97
Order No. Gage length A in inch    
A63/80.145.5/8z.37.i
ultra short, 3.00 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  5. Balluff-Chip BIS-C-122-04/L

  6. Data-Lock mechanical data carrier locking system

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.144.5/8z.37.i
ZG130, 5.12 inch

with back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [inch] 3/4
Ø D2 [inch] uk-uk1.40
Ø D2 [inch] ultra short1.40
Ø D2 [inch] ZG130-
Ø D3 [mm] ZG130-
L [mm] uk-uk1.93
L [mm] ultrakurz / kurz1.93
L [mm] ZG130-
Order No. Gage length A in inch    
A63/80.145.3/4z.57.i
uk-uk, 2.75 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.145.3/4z.37.i
ultra short, 3.00 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Clamping Ø D1 [inch] 1
Ø D2 [inch] uk-uk1.77
Ø D2 [inch] ultra short1.77
Ø D2 [inch] ZG130-
Ø D3 [inch] ZG130-
L [inch] uk-uk2.24
L [inch] ultra short2.24
L [inch] ZG130-
Order No. Gage length A in inch    
A63/80.145.1z.57.i
uk-uk, 3.00 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.145.1z.37.i
ultra short, 3.50 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
A63/80.140.1z.37.i
uk-uk, 3.50 inch

without back-up screw
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  2. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  3. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  4. Balluff-Chip BIS-C-122-04/L

  5. Data-Lock mechanical data carrier locking system

  6. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  7. Cooling adapters for uk/uk holders

  8. Cooling grooves on request
Product wishlist