Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- All functional surfaces fine machined
- More accurate than DIN
- Cool Jet, can be sealed
Your current product selection:
Heavy Duty Shrink Chuck
DIN 69893-1 · HSK-A63
Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- All functional surfaces fine machined
- More accurate than DIN
- Cool Jet, can be sealed
Heavy Duty Shrink Chuck
DIN 69893-1 · HSK-A63
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
- Smooth clamping of the tool shank
- No deformation at the tool shank after shrink process
- High runout accuracy: 3 μm
- Reinforced outer contour
- With dirt groove in the clamping bore
- With threaded holes in order to balance with balancing screws
- Cool Jet bores that can be sealed included
- Cooling with Cool Flash for an extra charge
- Without back-up screw
To shrink with all HAIMER Power Clamp 13 kW shrink fit units.
Technical data subjects to change without prior notice.
The most important features:
- 1. High runout accuracy (< 3 μm)
- 2. Reinforced wall thickness at the clamping range
- 3. Extremly rigid outer geometry
- 4. Dirt groove in the clamping bore for safe clamping force
- 5. Expansion grooves in the clamping bore
- 6. Standard with Cool Jet (can be re-sealed)
- 7. Safe-Lock™ (optional)
The most important features:
- 1. High runout accuracy (< 3 μm)
- 2. Reinforced wall thickness at the clamping range
- 3. Extremly rigid outer geometry
- 4. Dirt groove in the clamping bore for safe clamping force
- 5. Expansion grooves in the clamping bore
- 6. Standard with Cool Jet (can be re-sealed)
- 7. Safe-Lock™ (optional)
Cool Jet
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
Cool Jet
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
Cool Flash (optional)
- Optimized coolant bores with coolant outlet through slots
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- No more balls of chips on tool
- Optimized runout accuracy! No additional unbalance! No disturbing clearance!
- Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Cool Flash (optional)
- Optimized coolant bores with coolant outlet through slots
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- No more balls of chips on tool
- Optimized runout accuracy! No additional unbalance! No disturbing clearance!
- Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Technical drawing
Please select your clamping diameter:
| Clamping Ø D1 [inch] | 5/8 |
|---|---|
| Ø D2 [inch] | 1.81 |
| L [inch] | 2.01 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.145.5/8z.6 |  ultra short, 3.15 inch |
|
|
Accessory | ||
| A63.140.5/8z.6 |  short, 3.35 inch |
|
|
Accessory |
| Clamping Ø D1 [inch] | 3/4 |
|---|---|
| Ø D2 [inch] | 1.81 |
| L [inch] | 2.08 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| A63.145.3/4z.6 |  ultra short, 3.15 inch |
|
|
Accessory | ||
| A63.140.3/4z.6 |  short, 3.35 inch |
|
|
Accessory |
