Find your representative

Find your representative

  find
Find topic
Change language

HSK-A63 Face Mill Abror

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN
Your current product selection:
HSK-A63 Face Mill Abror

Face Mill Arbor
DIN 69893-1 · HSK-A63

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • More accurate than DIN

Face Mill Arbor
DIN 69893-1 · HSK-A63

For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).

DIN 69882-3

  • Inch sizes: Coolant bores on front side for an extra charge
  • Metric sizes: With coolant exit bores on the end face for milling cutters with central cooling
  • Included in delivery: Tightening bolt, without coolant tube

Technical data subjects to change without prior notice.

Technical drawing

HSK-A63 Face Mill Abror Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [inch] 3/4
Ø D2 [inch]1.67
L [inch]0.70
Order No. Gage length A in inch    
A63.050.3/4z HSK-A63 Face Mill Arbor short Pictogram
short, 1.97 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  5. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  6. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.3/4z HSK-A63 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  5. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  6. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.052.3/4z HSK-A63 Face Mill Arbor oversize Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  5. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  6. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [inch] 1
Ø D2 [inch]1.67
L [inch]0.70
Order No. Gage length A in inch    
A63.050.1z HSK-A63 Face Mill Arbor short Pictogram
short, 2.36 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  5. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  6. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.1z HSK-A63 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  5. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  6. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.052.1z HSK-A63 Face Mill Arbor oversize Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  5. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  6. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [inch] 1 1/4
Ø D2 [inch]1.67
L [inch]0.70
Order No. Gage length A in inch    
A63.050.11/4z HSK-A63 Face Mill Arbor short Pictogram
short, 2.36 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  7. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.11/4z HSK-A63 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  7. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [inch] 1 1/2
Ø D2 [inch]3.78
L [inch]0.94
Order No. Gage length A in inch    
A63.050.11/2z HSK-A63 Face Mill Arbor short Pictogram
short, 2.36 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  7. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.11/2z HSK-A63 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  7. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [mm] 16
Ø D2 [mm]36
L [mm]17
Order No. Gage length A in mm    
A63.050.16.KKB HSK-A63 Face Mill Arbor short Pictogram
short, 50.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [mm] 22
Ø D2 [mm]48
L [mm]19
Order No. Gage length A in mm    
A63.050.22.KKB HSK-A63 Face Mill Arbor short Pictogram
short, 50.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.22.KKB HSK-A63 Face Mill Arbor long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  4. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  5. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  6. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.052.22.KKB HSK-A63 Face Mill Arbor oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  4. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  5. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  6. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [mm] 27
Ø D2 [mm]60
L [mm]21
Order No. Gage length A in mm    
A63.050.27.KKB HSK-A63 Face Mill Arbor short Pictogram
short, 60.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.27.KKB HSK-A63 Face Mill Arbor long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.052.27.KKB HSK-A63 Face Mill Arbor oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [mm] 32
Ø D2 [mm]78
L [mm]24
Order No. Gage length A in mm    
A63.050.32.KKB HSK-A63 Face Mill Arbor short Pictogram
short, 60.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.32.KKB HSK-A63 Face Mill Arbor long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.052.32.KKB HSK-A63 Face Mill Arbor oversize Pictogram
oversize, 160.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [mm] 40
Ø D2 [mm]87
L [mm]27
Order No. Gage length A in mm    
A63.050.40.KKB HSK-A63 Face Mill Arbor short Pictogram
short, 60.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
A63.051.40.KKB HSK-A63 Face Mill Arbor long Pictogram
long, 100.00 mm
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant tube

    Coolant tube

    Necessary for all coolant through HSK spindles

  4. Wrench for coolant tubes

    Wrench for coolant tubes

    For assembling the coolant tube in the chuck

  5. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Product wishlist