Find your representative

Find your representative

  find
Find topic
Change language

Hollow taper shank DIN 69893 HSK-A, HSK-E, HSK-F

Products hollow taper shank DIN 69893 HSK-A, HSK-E, HSK-F, Tool Holder & Tool Clamping technology by HAIMER

The interface DIN 69893 has become the new standard for machining centres. The holder is clamped via its taper with flange contact surface. By doing so, a highly accurate centring and fixed axial position of the holder in the spindle is granted with a high repetitive accuracy when exchanging the tools. In the DIN 69893-1 HSK-A interface design an additional torque transmission takes place at the taper shank with drive keys. DIN 69893 HSK-A/HSK-E/HSK-F is mainly used in high-speed machining.


Technical specifications DIN 69893

Hollow taper shank HSK-A · DIN 69893-1

Hollow taper shank DIN 69893-1 HSK-A technical drawing

 

 

 

  • Tool holder surface hardness: 58 – 2 HRC
  • Tensile strength in core min. 1000 N/mm2
  • All functional surfaces fine machined
  • More accurate than DIN
  • Incl. bore for data chip Ø 10 mm
  • Symmetric force transmission to clamping shoulder
  • Precise drive slots on the HSK
Maß [mm] D1 D2 max. D3 D4 L1 L2 min. L3 L4 L5 L6 G T1
HSK-A32 32 26 24,007 10 16 15 20 3,2 7,05 7 M10 x 1 5,4
HSK-A40 40 34 30,007 10 20 15 20 4 8,05 7 M12 x 1 5,3
HSK-A50 50 42 38,009 10 25 16 26 5 10,54 7 M16 x 1 5,2
HSK-A63 63 53 48,010 10 32 16 26 6,3 12,54 7 M18 x 1 5
HSK-A80 80 67 60,012 10 40 16 26 8 16,04 7 M20 x 1,5 5
HSK-A100 100 85 75,013 10 50 16 29 10 20,02 7 M24 x 1,5 4,9
HSK-125 125 111 95,016 10 63 16 29 12,5 25,02 7 M30 x 1,5 4,8

Hollow taper shank HSK-E · DIN 69893-5

Hollow taper shank DIN 69893-5 HSK-E technical drawing

 

 

  • Tool holder surface hardness: 58 – 2 HRC
  • Tensile strength in core min. 1000 N/mm2
  • All functional surfaces fine machined
  • More accurate than DIN
  • Without bore for data chip
  • Symmetric force transmission to clamping shoulder
Length [mm] D1 D2 max. D3 L1 L2 min. L3 L4 G
HSK-E25 25 20 19,006 13 10 10 2,5 M8 x 1
HSK-E32 32 26 24,007 16 15 20 3,2 M10 x 1
HSK-E40 40 34 30,007 20 15 20 4 M12 x 1
HSK-E50 50 42 38,009 25 16 26 5 M16 x 1

Hollow taper shank HSK-F · DIN 69893-6

Hollow taper shank DIN 69893-6 HSK-F technical drawing

 

 

  • Tool holder surface hardness: 58 – 2 HRC
  • Tensile strength in core min. 1000 N/mm2
  • All functional surfaces fine machined
  • More accurate than DIN
  • Without bore for data chip
  • Symmetric force transmission to clamping shoulder
Length [mm] D1 D2 max. D3 L1 L2 min. L3 L4
HSK-F63 63 53 38,009 25 16 26 5
HSK-F80 Makino 80 78 48,010 32 16 26 6,3
Product wishlist