Find your representative

Find your representative

  find
Find topic
Change language

CAT 40 Face Mill Arbor

Certificate of Quality

  • Chuck fine balanced G2.5 at 22.000 rpm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form ADB
Your current product selection:
CAT 40 Face Mill Arbor

Face Mill Arbor
ASME B5.50 · CAT40

Certificate of Quality

  • Chuck fine balanced G2.5 at 22.000 rpm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form ADB

Face Mill Arbor
ASME B5.50 · CAT40

For clamping face-mill cutters

CAT 40 FORM AD/AF.
Form AD/AF means: Central-coolant supply and coolant channels through the flange which can be sealed again.

  • Included in delivery: Clamping screw

Technical data subjects to change without prior notice.

Technical drawing

CAT 40 Face Mill Arbor Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [inch] 3/4
Ø D2 [inch]1.71
L [inch]0.67
Order No. Gage length A in inch    
40.750.3/4z CAT40 Face Mill Arbor short Pictogram
short, 1.38 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
40.751.3/4z CAT40 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [inch] 1
Ø D2 [inch]2.17
L [inch]0.67
Order No. Gage length A in inch    
40.750.1z CAT40 Face Mill Arbor short Pictogram
short, 1.97 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
40.751.1z CAT40 Face Mill Arbor long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  4. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  5. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [inch] 1 1/4
Ø D2 [inch]2.75
L [inch]0.67
Order No. Gage length A in inch    
40.750.11/4z CAT40 Face Mill Arbor short Pictogram
short, 1.97 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  4. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  5. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  7. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Clamping Ø D1 [inch] 1 1/2
Ø D2 [inch]3.78
L [inch]0.94
Order No. Gage length A in inch    
40.750.11/2z CAT40 Face Mill Arbor short Pictogram
short, 1.97 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Tightning bolts

    Tightning bolts

    Tightning bolts DIN 6367 for Combination Shell End Mill Adapters and Face Mill Arbors

  3. Coolant bores

    Coolant bores

    Upgrade of coolant bores on Face Mill Arbors and Combination Shell End Mill Arbors
    Order No.: 91.100.03

  4. Clamping screw

    Clamping screw

    For Weldon- and Whistle-Notch Tool Holders

  5. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  7. Wrench DIN 6368

    Wrench DIN 6368

    Wrench DIN 6368 for tightning bolts for Face Mill Arbors and Combination Shell End Mill Adapters Ø 16 - 60 mm
Product wishlist