Find your representative

Find your representative

  find
Find topic
Change language

CAT 40 Collet Chuck Typ ER

Certificate of Quality

  • Chuck fine balanced G2.5 at 22.000 rpm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form ADB
Your current product selection:
CAT 40 Collet Chuck Typ ER

Collet Chuck Type ER
ASME B5.50 · CAT40

Certificate of Quality

  • Chuck fine balanced G2.5 at 22.000 rpm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form ADB

Collet Chuck Type ER
ASME B5.50 · CAT40

For clamping tools with cylindrical shank in ER collets according to ISO 15488.

CAT40 FORM AD/AF.
Form AD/AF means: Central-coolant supply and coolant channels through the flange which can be sealed again.

  • Balanced collet nuts with special slide coating for low friction and higher clamping forcess
  • Included in delivery: ER collet chuck with pre-balanced collet nut

Technical data subjects to change without prior notice.

Features Collet Chuck Typ ER

The most important features:

  • 1. Fine balanced G2.5 at 25,000 rpm
  • 2. All functional surfaces grinded
  • 3. Fine balanced ER nut
  • 4. High runout accuracy
Features Collet Chuck Typ ER

The most important features:

  • 1. Fine balanced G2.5 at 25,000 rpm
  • 2. All functional surfaces grinded
  • 3. Fine balanced ER nut
  • 4. High runout accuracy

Technical drawing

CAT 40 Collet Chuck Typ ER Technical Drawing

Please select your clamping diameter:

Version ER 11
Ø D [inch]0.75
Clamping range [inch]0.02 - 0.28
Clamping range [mm]0.5 - 7
L [inch]-
Order No. Gage length A in inch    
40.721.11 CAT40 Collet Chuck Standard long Pictogram
long, 3.94 inch

L = drilled through
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Version ER 16
Ø D [inch]1.1
Clamping range [inch]0.02 - 0.39
Clamping range [mm]0.5 - 10
L [inch] short-
L [inch]-
Order No. Gage length A in inch    
40.720.16 CAT40 Collet Chuck Standard short Pictogram
short, 2.76 inch

L = drilled through
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.721.16 CAT40 Collet Chuck Standard long Pictogram
long, 3.94 inch

L = drilled through
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.722.16 CAT40 Collet Chuck Standard oversize Pictogram
oversize, 6.30 inch

L = drilled through
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.726.16 CAT40 Collet Chuck Standard ZG200 Pictogram
ZG200, 7.87 inch

L = drilled through
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 20
Ø D [inch]1.34
Clamping range [inch]0.04 - 0.51
Clamping range [mm]1 - 13
L [inch] short1.63
L [inch].1.63
Order No. Gage length A in inch    
40.720.20 CAT40 Collet Chuck Standard short Pictogram
short, 2.76 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.721.20 CAT40 Collet Chuck Standard long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.722.20 CAT40 Collet Chuck Standard oversize Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.726.20 CAT40 Collet Chuck Standard ZG200 Pictogram
ZG200, 7.87 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 25
Ø D [inch]1.65
Clamping range [inch]0.04 - 0-63
Clamping range [mm]1 - 16
L [inch] short2.44
L [inch]2.24
Order No. Gage length A in inch    
40.720.25 CAT40 Collet Chuck Standard short Pictogram
short, 2.76 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.721.25 CAT40 Collet Chuck Standard long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.722.25 CAT40 Collet Chuck Standard oversize Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.726.25 CAT40 Collet Chuck Standard ZG200 Pictogram
ZG200, 7.87 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 32
Ø D [inch]1.97
Clamping range [inch]0.04 - 0.79
Clamping range [mm]1 - 20
L [inch] short2.52
L [inch]2.52
Order No. Gage length A in inch    
40.720.32 CAT40 Collet Chuck Standard short Pictogram
short, 2.76 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.721.32 CAT40 Collet Chuck Standard long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.722.32 CAT40 Collet Chuck Standard oversize Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.726.32 CAT40 Collet Chuck Standard ZG200 Pictogram
ZG200, 7.87 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Version ER 40
Ø D [inch]2.48
Clamping range [inch]0.08 - 1.02
Clamping range [mm]2 - 26
L [inch] short2.87
L [inch]2.87
Order No. Gage length A in inch    
40.720.40 CAT40 Collet Chuck Standard short Pictogram
short, 2.76 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  3. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  4. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  5. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  6. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  7. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  8. Locknut ER

    Locknut ER

    Locknut pre-balanced

  9. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  10. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  11. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  12. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.721.40 CAT40 Collet Chuck Standard long Pictogram
long, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40.722.40 CAT40 Collet Chuck Standard oversize Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Balancing rings

    Balancing rings

    For fine-balancing of all tool holders with cylindrical outer diameter

  3. Torque wrench

    Torque wrench

    For highest clamping and repeatability when tightning Standard-ER and Power Collets (Inserts for torque wrench additionally required)
    Order No.: 84.600.00

  4. Clamping wrench for ER locknuts

    Clamping wrench for ER locknuts

    Wrench for locknuts ER 25 - ER 40

  5. ER Collets

    ER Collets

    High precision collets for all Collet Chucks Typ ER

  6. HG Mini Collets

    HG Mini Collets

    HG Mini Collets for HG Mini Extentions

  7. HG Mini Extentions

    HG Mini Extentions

    For clamping tools with small diameters in High-Precision Chucks and Collet Chucks Type ER and Power Collet

  8. Back up screws for Collet Chucks

    Back up screws for Collet Chucks

    Available in different versions

  9. Locknut ER

    Locknut ER

    Locknut pre-balanced

  10. Locknut ER (HS-Version)

    Locknut ER (HS-Version)

    Locknut fine-balanced

  11. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  12. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  13. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Product wishlist