Find your representative

Find your representative

  find
Find topic
Change language

CAT 40 with face contact Shrink Fit Chuck Standard

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form AD
  • Cool Jet, can be sealed
Your current product selection:
CAT 40 with face contact Shrink Fit Chuck Standard

Shrink Fit Chuck Standard Version
similar ASME B5.50 · CAT40 with face contact

Certificate of Quality

  • Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
  • All functional surfaces fine machined
  • Taper tolerance AT3
  • Coolant supply form AD
  • Cool Jet, can be sealed

Shrink Fit Chuck Standard Version
similar ASME B5.50 · CAT40 with face contact

Shrink fit chuck suitable to all kind of shrink fit units.

CAT 40 with face contact FORM AD.
Form AD/AF means: Central-coolant supply

  • Additional support on the flange surface for more rigidity
  • Heat resistant hot-working steel
  • Hardened 54-2 HRC
  • For HSS and solid carbide tools
  • Shank tolerance h6
  • With threaded holes in order to balance with balancing screws
  • Cool Jet coolant bores that can be sealed included
  • Cooling with Cool Flash for an extra charge

Technical data subjects to change without prior notice.

Features Shrink Fit Chuck Standard

The most important features:

  • 1. High runout accuracy (< 3 μm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Features Shrink Fit Chuck Standard

The most important features:

  • 1. High runout accuracy (< 3 μm)
  • 2. Extreme clamping torque by high pressing in the clamping bore
  • 3. Short chamfer
  • 4. Dynamic form: Reinforced shank at long tool holders. Compromise between slimness (marginal interference contour) and rigidity
  • 5. Cool Jet (on request)
  • 6. Threaded bores for simple and fast balancing with screws
Cool Jet for Shrink Fit Chucks

Cool Jet

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Cool Jet for Shrink Fit Chucks

Cool Jet

  • Optimized coolant bores, aimed at center
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • Higher reliability of cutting process
  • No more balls of chips on tool
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Cool Flash

Cool Flash (optional)

  • Optimized coolant bores with coolant outlet through slots
  • Coolant directly to the cutting edge
  • Extended tool life up to 100%
  • No more balls of chips on tool
  • Optimized runout accuracy! No additional unbalance! No disturbing clearance!
  • Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)

Technical drawing

CAT 40 with face contact Shrink Fit Chuck Standard - Technical Drawing

Please select your clamping diameter:

Clamping Ø D1 [inch] 1/8
Ø D2 [inch]0.39
Ø D3 [inch]-
L [inch]0.35
Order No. Gage length A in inch    
40P.840.1/8z CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch

Without back-up screw,without threads for balancing screws, with slits along the clamping bore for coolant around the tool
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)
Clamping Ø D1 [inch] 3/16
Ø D2 [inch]0.39
Ø D3 [inch]-
L [inch]0.47
Order No. Gage length A in inch    
40P.840.3/16z CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch

Without back-up screw,without threads for balancing screws, with slits along the clamping bore for coolant around the tool
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)
Clamping Ø D1 [inch] 1/4
Ø D2 [inch]0.83
Ø D3 [inch]1.06
L [inch]1.42
Order No. Gage length A in inch    
40P.840.1/4z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.1/4z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.1/4z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 5/16
Ø D2 [inch]0.83
Ø D3 [inch]1.06
L [inch]1.42
Order No. Gage length A in inch    
40P.840.5/16z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40P.844.5/16z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
40P.842.5/16z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Reduction Sleeves for Mechanical Chucks

    For clamping small shanks in chucks with diameter 8 mm ID`s
Clamping Ø D1 [inch] 3/8
Ø D2 [inch]0.95
Ø D3 [inch]1.26
L [inch]1.65
Order No. Gage length A in inch    
40P.840.3/8z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.3/8z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.3/8z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 7/16
Ø D2 [inch]0.95
Ø D3 [inch]1.26
L [inch]1.65
Order No. Gage length A in inch    
40P.840.7/16z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.7/16z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.7/16z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 1/2
Ø D2 [inch]0.95
Ø D3 [inch]1.26
L [inch]1.85
Order No. Gage length A in inch    
40P.840.1/2z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.1/2z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.1/2z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 5/8
Ø D2 [inch]1.06
Ø D3 [inch]1.34
L [inch]1.97
Order No. Gage length A in inch    
40P.840.5/8z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.5/8z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.5/8z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 3/4
Ø D2 [inch]1.30
Ø D3 [inch]1.65
L [inch]2.05
Order No. Gage length A in inch    
40P.840.3/4z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.3/4z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.3/4z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  6. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  7. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  8. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 7/8
Ø D2 [inch]1.30
Ø D3 [inch]1.65
L [inch]2.05
Order No. Gage length A in inch    
40P.840.7/8z.4 CAT40 with face contactShrink Fit Chuck Standard short - Pictogram
short, 3.15 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.7/8z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.7/8z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40

  3. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  4. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Clamping Ø D1 [inch] 1
Ø D2 [inch]1.73
Ø D3 [inch]2.09
L [inch]2.28
Order No. Gage length A in inch    
40P.840.1z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40
40P.844.1z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40
40P.842.1z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  3. Shrink fit brush

    Shrink fit brush

    For cleaning the socket of the shrink fit chuck in order to achieve the best possible shrink fit connection

  4. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  5. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  6. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  7. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6

  8. Cool Flash

    Cool Flash

    Upgrade of the Cool Flash cooling system on tool holders with existing Cool Jet cooling bores
    Order No.: 91.100.40
Clamping Ø D1 [inch] 1 1/4
Ø D2 [inch]1.73
Ø D3 [inch]2.09
L [inch]2.28
Order No. Gage length A in inch    
40P.840.11/4z.4 CAT40 with face contact Shrink Fit Chuck Standard short - Pictogram
short, 3.94 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  3. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.844.11/4z.4 CAT40 with face contact Shrink Fit Chuck Standard ZG130 - Pictogram
ZG130, 5.12 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  3. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
40P.842.11/4z.4 CAT40 with face contact Shrink Fit Chuck Standard oversize - Pictogram
oversize, 6.30 inch
DXF
 Step
Add item to wishlist Add item to wishlist Item already on wishlist
Accessory
  1. Pull studs

    Pull studs

    Available in different versions

  2. Back up screws for shrink fit chucks

    Back up screws for shrink fit chucks

    Available in different versions

  3. Shrink fit extentions

    Shrink fit extentions

    The universal solution for special machining requirements

  4. Tention spring for shrink fit chucks

    Tention spring for shrink fit chucks

    For easy length presetting

  5. Dowel

    Dowel

    Dowel for sealing the coolant supply via the collar (Form B)

  6. Balancing screws

    Balancing screws

    For fine-balancing of all tool holders with balancing threads M6
Product wishlist