Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- All functional surfaces fine machined
- Taper tolerance AT3
- Coolant supply form AD
- Cool Jet, can be sealed
Your current product selection:
Power Shrink Chuck with Safe-Lock™
similar ASME B5.50 · CAT40 with face contact
Certificate of Quality
- Chuck body fine balanced G2.5 at 25.000 rpm or U < 1 gmm
- All functional surfaces fine machined
- Taper tolerance AT3
- Coolant supply form AD
- Cool Jet, can be sealed
Power Shrink Chuck with Safe-Lock™
similar ASME B5.50 · CAT40 with face contact
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
- Additional support on the flange surface for more rigidity
- Increased machining capacity due to higher spindle speeds, higher feed rates and larger cutting depths
- Shorter processing times
- Quieter running, therefore better surface quality and protection of tools, spindles and machines
- Higher machining accuracy
- Coolant supply form AD
- With threaded holes in order to balance with balancing screws
- Cool Jet coolant bores that can be sealed included
- Cooling with Cool Flash for an extra charge
- Safe-Lock™ pullout protection
The long versions with slim tips are especially versatile to use.
- High rigidity
- Slim at the tip
- Dampen vibrations
- Higher clamping forces
- Equally suited to high-speed manufacturing and heavy milling
- Universal usage, saves space in tool magazine
Technical data subjects to change without prior notice.
The most important features:
- 1. High runout accuracy (< 3 μm)
- 2. Low tendency towards vibrations by optimised outer geometry
- 3. Slim design at the top
- 4. Very rigid shank
- 5. Standard with Cool Jet (can be re-sealed)
- 6. Dirt groove in the clamping bore for safe clamping force
- 7. Safe-Lock™ (optional)
The most important features:
- 1. High runout accuracy (< 3 μm)
- 2. Low tendency towards vibrations by optimised outer geometry
- 3. Slim design at the top
- 4. Very rigid shank
- 5. Standard with Cool Jet (can be re-sealed)
- 6. Dirt groove in the clamping bore for safe clamping force
- 7. Safe-Lock™ (optional)
Safe-Lock™ pull out protection
- Highly accurate clamping due to shrink fit technology
- High torque due to form closed clamping
- No loss of accuracy
- No pull out and no spinning ot the tool
- Groove on tool shank is directed so that the tool will be pulled into the chuck (depending on direction of rotation)
Safe-Lock™ pull out protection
- Highly accurate clamping due to shrink fit technology
- High torque due to form closed clamping
- No loss of accuracy
- No pull out and no spinning ot the tool
- Groove on tool shank is directed so that the tool will be pulled into the chuck (depending on direction of rotation)
Cool Jet
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
Cool Jet
- Optimized coolant bores, aimed at center
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- Higher reliability of cutting process
- No more balls of chips on tool
Cool Flash (optional)
- Optimized coolant bores with coolant outlet through slots
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- No more balls of chips on tool
- Optimized runout accuracy! No additional unbalance! No disturbing clearance!
- Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Cool Flash (optional)
- Optimized coolant bores with coolant outlet through slots
- Coolant directly to the cutting edge
- Extended tool life up to 100%
- No more balls of chips on tool
- Optimized runout accuracy! No additional unbalance! No disturbing clearance!
- Cool Flash available for shank diameter 1/4" (6 mm) - 1 1/4" (25 mm)
Machining example Power Shrink Cuck
- Milling - Ø: 16 mm; n = 13.000 rpm, Feed rate: vf = 5,2 m/min
- Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
- Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Machining example Power Shrink Cuck
- Milling - Ø: 16 mm; n = 13.000 rpm, Feed rate: vf = 5,2 m/min
- Right: Power Shrink Chuck (Length: A = 160 mm, cutting depth: ap = 3,6 mm)
- Left: Standard Shrink Chuck (Length: A = 160 mm; Cutting depth: ap = 1,8 mm)
Technical drawing
Please select your clamping diameter:
| Clamping Ø D1 [inch] | 1/2 |
|---|---|
| Ø D2 [inch] | 1.04 |
| L [inch] | 1.85 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| 40P.845.1/2z.37 | ultra short, 2.56 inch |
|
|
Accessory |
| Clamping Ø D1 [inch] | 5/8 |
|---|---|
| Ø D2 [inch] | 1.16 |
| L [inch] | 1.97 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| 40P.845.5/8z.37 | ultra short, 2.56 inch |
|
|
Accessory |
| Clamping Ø D1 [inch] | 3/4 |
|---|---|
| Ø D2 [inch] | 1.40 |
| L [inch] | 2.05 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| 40P.845.3/4z.37 | ultra short, 2.56 inch |
|
|
Accessory |
| Clamping Ø D1 [inch] | 1 |
|---|---|
| Ø D2 [inch] | 1.79 |
| L [inch] | 2.28 |
| Order No. | Gage length A in inch | |||||
|---|---|---|---|---|---|---|
| 40P.845.1z.37 | ultra short, 2.56 inch |
|
|
Accessory |
