Certificate of Quality
- Original HAIMER accessory
Reduction sleeve
Certificate of Quality
- Original HAIMER accessory
Reduction sleeve
For clamping small shanks in chucks with Ø 5/16" or 8 mm ID’s
- Shank tolerance h6
- Sealed (ready for internal coolant)
For use in all chucks for reduction:
- Shrink Fit Chucks
- Collet Chucks
- Hydraulic Chucks
- HG-Chucks
- Other high precision mechanical chucks
Technical data subject to change without prior notice
Technical drawing
Technical data
| Order No. | |
|---|---|
79.110.3/32z | |
79.110.1/8z | |
79.110.5/32z | |
79.110.3/16z | |
79.110.7/32z | |
| Ø D [inch] | Ø D1 [inch] | L [inch] | Downloads |
|---|---|---|---|
| 3/32 | 5/16 | 0.27 | |
| 1/8 | 5/16 | 0.35 | |
| 5/32 | 5/16 | 0.47 | |
| 3/16 | 5/16 | 0.56 | |
| 7/32 | 5/16 | 0.65 |
| Order No. | |
|---|---|
79.110.2.5 | |
79.110.03 | |
79.110.3.5 | |
79.110.04 | |
79.110.4.5 | |
79.110.05 | |
79.110.5.5 | |
| Ø D [mm] | Ø D1 [mm] | L [mm] | L1 [mm] | Downloads |
|---|---|---|---|---|
| 2,5 | 8 | 7,5 | 30,5 | |
| 3 | 8 | 9 | 30,5 | |
| 3,5 | 8 | 10,5 | 30,5 | |
| 4 | 8 | 12 | 30,5 | |
| 4,5 | 8 | 13,5 | 30,5 | |
| 5 | 8 | 15 | 30,5 | |
| 5,5 | 8 | 16,5 | 30,5 |
