
Main features
- Shrinking of solid carbide and HSS from Ø 3 – 50 mm
- Intelligent 13 kW motor coil VS32-M and 20 kW coil
- Integrated contact cooling with linear guided cooling bodies
- Intelligent cooling system with temperature control
- Length presetting with height stop
Your current product selection:

Shrink fit machine Power Clamp Premium Plus
Main features
- Shrinking of solid carbide and HSS from Ø 3 – 50 mm
- Intelligent 13 kW motor coil VS32-M and 20 kW coil
- Integrated contact cooling with linear guided cooling bodies
- Intelligent cooling system with temperature control
- Length presetting with height stop
Shrink fit machine Power Clamp Premium Plus
The Power Clamp Premium Plus is a high-end shrink fit device for absolute process security with two separated electronic units and two coils. The cooling bodies are fixes to linear guides. The cooling process is temperature controlled and ends automatically.
- With intelligent coil VS32 m and 20 kW coil
- Integrated contact cooling with six cooling bodies
- Attachement of the cooling bodies at linear guides
- Centered move-down of the cooling bodies onto the tool holder
- No damage at the edges of the cutting tool
- Automatic move-up of the cooling bodies after the termination of the cooling process (temperature-time controlled)
- Two length presetting units with height stop
- Tools: solid carbide and HSS from Ø 3 – 50 mm
- Power: ca. 33 kW
Included in delivery: Shrink fit machine Power Clamp Premium Plus; Cooling Manager; 2 precision base holders; 2 precision chuck supports
Technical data subject to change without prior notice.
Equipment
-
Coil 20 kWOrder no. 80.151.10Coil for shrinking of tool holders with Ø 40 - 50 mm.
-
Motor coil VS32-MOrder no. 80.101.03NGIntelligent NG coil with automatic setting of the shrinking parameter.
-
Integrated contact coolingOrder no. -Contentrated cooling due to water-cooled cooling bodies.
-
TME Cooling system for 20 kW machinesOrder no. 80.105.19.10Intelligent Cooling System with temperature sensor.
-
Cooling managerOrder no.Switch unit for integrated contact cooling.
-
2 precision base holders und 2 precision chuck supportOrder no.Chuck support in all actual tapers.
-
2 Length presetting units with height stopOrder no.For presetting of the tool into the desired position.
Technical data
Power [kW] | 33 |
---|---|
Mains voltage | 3 x 400 Volt, 63 Ampere, 33 kW |
Maximum length of shrink fit chuck [mm] | 535 |
Dimensions [mm] | 1600 x 2300 x 850 |
Weight [kg] | 550 |
Tools | Solid carbide and HSS |
Tool diameter [mm] | 3 - 50 |
Order No. | |||
---|---|---|---|
80.170.10 | Accessory |