|
|
 |
|
|
|
Quick
and precise centering of bores and arbors
Clamped into the spindle of the milling machine, the Centro will be positioned
close to the wanted axis. The probe tip is adjusted so that the sensing
ball touches the surface of the bore or arbor.
Dial gauge always in sight
The probe tip slides at low spindle speed along the surface of the workpiece.
Its movement is transferred to the pointers of the dial gauge. The housing
of the Centro does not rotate with the spindle and thus the dial gauge always
stays within sight of the operator.
Centro finds the axis you wanted. For sure.
The pointers deflect as long as the spindle and the wanted axis do not coincide.
Now the position of the spindle can be corrected until the pointers come
to a standstill. The wanted axis is found. |
|
| Further advantages: |
|
| – |
|
Checking
face run of surface to spindle |
|
| – |
|
Concentricity
errors of spindle and chuck will be compensated >> Adjustment
not necessary |
|
| – |
|
The
unusual big sized dial gauge eliminates every single imprecision |
|
| – |
|
Replaceable
probe |
Technical data subject to change without prior notice.
|
|
Technical
details |
|
|
|
|
|
|
Order
number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Centro
with straight probe tip |
|
|
|
|
|
|
80.300.00 |
|
|
|
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Probe
tip |
|
|
Ø
5 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clamping
shank |
|
|
Ø
16 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Centering
accuracy |
|
|
0,003
mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Max.
rotation speed |
|
|
150
1/min |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measuring
range interior diameter (drill hole) |
|
|
Ø
3-125 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Measuring
range exterior diameter (shaft, with probe tip bent) |
|
|
Ø
0-125 mm |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Accessories |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Probe
tip straight with ball |
|
|
Ø 5 mm |
|
|
|
80.301.00 |
|
|
|
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Probe
tip bent with ball |
|
|
Ø
5 mm |
|
|
|
80.302.00 |
|
|
|
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Probe
tip straight with ball |
|
|
Ø
2 mm, for small bores |
|
|
|
80.303.00 |
|
|
|
INFO
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
